Tyas Nurul Zafirah, Masruroh, Istiroyah, Setyawan Purnomo Sakti
QCM-based alcohol vapor sensors have been widely researched, and various materials have been deposited onto the sensor surface to serve as a functional layer. However, non-conductive polymers such as SBS as a functional layer for alcohol sensors are still minimally reported. In this study, the SBS was deposited on 1 side of the QCM using the spin coating technique. After deposition, the layer was annealed for 1 h. The annealing temperatures are 100, 150 and 200 °C. The concentrations of exposed alcohol vapor were 5, 10, 15, 20, 25, 50, 75 and 100 ppm. This study demonstrated that the SBS layer has the potential to be a functional layer of alcohol sensors. SBS 200 °C is an optimum functional layer for alcohol vapor sensors due to its high ∆f and sensitivity. Meanwhile, SBS 100 °C has poor ∆f and sensitivity. This is due to the morphology of 200 °C SBS, which consists of more valleys that perform as interaction sites for SBS and alcohol molecules. However, one of the limitations of SBS as a functional sensor layer for alcohol sensors is its low selectivity, which is a characteristic of rubbery polymers. © 2024, Walailak University. All rights reserved.
Department of Physics, Brawijaya University, Malang, Indonesia; Sensor Technology Laboratory, Department of Physics, Brawijaya University, Malang, Indonesia