Arifin Sanusi, Sudjito Soeparman, Slamet Wahyudi, Lilis Yuliati
The Savonius wind turbine has a lower performance than other types of wind turbines which may attract more study focus on this turbine. This study aimed to improve wind turbine performance by combining a conventional blade with an elliptical blade into a combined blade rotor. The analysis was performed on three blade models in computational fluid dynamics (CFD) using ANSYS_Fluent Release 14.5. Then the results were verified experimentally using an open wind tunnel system. The results of the numerical simulation were similar to the experimental and showed that the combined blade rotor has better dragging flow and overlap flow than the conventional and elliptical blade. Experimental verification showed that the combined blade was to increase the maximum coefficient of power (Cpmax.) by 11% of the conventional blade and to 5.5% of the elliptical blade. © 2017, Turbomachinery Society of Japan. All rights reserved.
Department of Mechanical Engineering, Brawijaya University, Jalan MT. Haryono 167, Malang, 65145, Indonesia; Department of Mechanical Engineering, Nusa Cendana University, Jalan Adisucipto, Kupang, 85001, Indonesia
