Helmy Purwanto, Rudy Soenoko, Anindito Purnowidodo, Agus Suprapto
In this paper, the effect of soft-hard plate and rubber thickness as absorbent impact against on ballistic resistance with 5.56 x 45 mm caliber deformable projectile is investigated. The characteristic of ballistic impact for each configuration target is obtained and compared based on the investigation of the hardness effect of the front plate and the thickness of rubber. The experimental results approached by simulation with finite element method were used to know several characters due to the ballistic impact. The experiment and simulation results showed that the projectile is able to perforate front plate and the impact on the back plate form a bulge on every configuration. The configuration of hard plate as front plate reveals minimum ballistic impact due to the projectile rate. The simulation shows that the maximum stress concentration occurs only on the front plate, so the front plate fails. © 2018 Eastern Macedonia and Thrace Institute of Technology.
Department of Mechanical Engineering, Wahid Hasyim University, Semarang, Indonesia; Doctoral Student in Department of Mechanical Engineering, Brawijaya University, Malang, Indonesia; Department of Mechanical Engineering, Brawijaya University, Malang, Indonesia; Department of Mechanical Engineering, Merdeka University, Malang, Indonesia
