Ultrafine particle filter design for motorcycle emission exhaust system: A high voltage electrostatic-based system

Open

Arinto Yudi Ponco Wardoyo, Hari Arief Dharmawan, Muhammad Nurhuda, Arif Budianto

2020 International Journal of GEOMATE Vol. 18 Issue 67 Article Cited by 1 Quartile

Abstract

A large number of motor vehicles in the world have been linked to the increase of the emissions, such as particulate matters and gases. These pollutants, especially for the particulate matters with the diameter less than 0.1 micrometer or ultrafine particles, become detrimental thing to the natural environment and human health. There is a need to develop a better method to decrease the particles. Thus, one step ahead of the technological improvement in the transportation sector is the development of an emission filter applied in a motor vehicle exhaust system. According to this background, we developed an ultrafine particle filtering system based on an electrostatic principle using a direct current-high voltage. The filter is based on a electrostatic principle by using uses aluminum as the anode and cathode. This filter was tested under the different DC voltage of 100, 200, 300, and 400 Volt. The efficiency of the filter was tested by measuring the motor cycle ultrafine particles before and after applying the electrostatic filter. The particle concentrations were measured by using a TSI P-Trak Ultrafine Particle Counter model 8525. The result shows that the designed filter works well in reducing the ultrafine particles., with the efficiency of 7% to 46%. The filter efficiency depends on the applied voltage. © Int. J. of GEOMATE. All rights reserved.

Affiliations

Faculty of Mathematics and Natural Sciences, Brawijaya University, Indonesia